Release Date: 2015.08.10
Overview:
Beta Firmware for Phantom 3 Advance version updated to: V01.04.0001
Beta Firmware for Phantom 3 Professional version updated to: V01.04.0001
Beta Firmware for Inspire 1 version updated to: V01.04.00.01
Enhancement:
1. Added option for failsafe action while the aircraft is in Waypoint mode.
2. Enable emergency stop interface for Onboard SDK.
3. Added Point of Interest orientation mode on protocol level.
4. Modified the limit value for follow slop and max velocity attribute.
5. Added altitude tracking for Follow mode.
6. Modified push data operation in Follow mode.
Bug Fixes:
1. Fixed the issue of flight altitude restriction is by-passed when pushing the throttle up to elevate
the aircraft during failsafe.
2. Fixed the issue of motor drive issue for the gimbal.
3. Fixed the issue of motor power display error.
4. Fixed the issue of Joystick API that may lead to crashing.
5. Fixed the issue of aircraft unable to resume from pausing in Follow mode.
6. Fixed the issue of aircraft does not enter failsafe during low battery when using a non-
intelligent flight battery.
7. Fixed the incorrect yawing orientation issue.
8. Fixed the issue of aircraft can take off even with the GPS is unplugged from the center board.
9. Fixed the issue of aircraft does not fly in a straight line while operating in the Course Lock mode.
Gimbal
Code optimization and fixed various bugs.
精灵3及悟1开发版固件1.4.01有什么新功能
与本文相关的文章
- DJI Mavic Pro 发布V01.03.0600固件 新增固定翼模式(内含演示)
- DJI Mavic Pro 发布V01.03.0500固件
- DJI Inspire 2发布V01.0.0240固件
- Mavic Pro V01.03.0400固件发布
- Phantom 4 Pro/Pro+ 固件V01.02.0304发布
- 大疆精靈4pro固件升級0203後雲台不停俯仰問題修復方法
- Phantom 4 Pro/Pro+ 发布V01.01.0203固件
- Phantom4相机升固件后损坏?
- 注意 YUNEEC 昊翔 H480升级V1.26固件后,容易射浆
- 精灵4更新固件v1.2.503后偶现GPS通信异常
- Inspire 1和Inspire 1 Pro最新固件v1.9.1.10发布
- 大疆创新发布灵眸Osmo Pro新固件版本V1.1.0.10
- DJI Phantom 4 v1.1.301固件3.5KM长途试飞
- DJI 精灵4固件1.0.288发布,掰杆停机逻辑终于优化,菜鸟有福了…
- 大疆创新发布“悟”Inspire 1 Pro最新固件v1.4.0.70
- 零度探索者827相机固件导致图传几乎不能使用
- Phantom 3系列的固件版本已更新至V1.5.0030
- Phantom3,Inspire1 固件升级包 v1.4.0010已发布
- 据说修复BUG,Naza M固件版本更新至v4.06
- 实测精灵3固件1.26测试-50米内非常不稳定
- 精灵3P版固件V1.2.6实测试,有视频有真象
- 精灵3P升级1.26后炸机视频全记录,求大神分析原因。。
- NAZA V2升级到V4.04,提示错误[80] 建议暂停升级
- inspire1固件升级后炸鸡!请升级的朋友小心哈!
- Inspire1新固件1.2.1.0发布
- 固件升级到3.12后,电池变成了黑户口,什么破?
- 精灵2刷3.02以及3.2固件后自动返航失速坠机
- 已停产DJI Mavic 2\Phantom 4 Pro V2.0迎来新固件,增加Remote ID支持
- DJI Mavic 3系列0905固件重大更新内容
- DJI大疆创新Mavic 3 Classic发布推送新固件,增加巡航控制功能
- DJI Air 2S 发布V02.04.20.40固件,高清图片同步有了
- DJI FPV发布V01.02.0000固件,限速至不得高于50KM/H
- DJI Air 2S新固件V02.04.16.90发布,AirSense不报错了
- DJI Mini 2新固件V01.02.0300,返航恢复朝向控制
- DJI FPV 3月2日固件发布记录(V01.01.0000)